Microdermabrasion, also known as Microderm, Diamond Peel, lunchtime peel or Parisian Peel; is a skin-exfoliating treatment performed on patients. It is a machine-assisted procedure used to improve the condition of scars, wrinkles, fine lines, as well as other skin conditions. Microdermabrasion and dermabrasion are not the same, as dermabrasion is a much more invasive surgical procedure — it is typically performed by medical professional, and done so under general anesthesia.

The primary advantages of using a microdermabrasion over many other skin repair techniques is the outcome, along with quick recovery time, and a much lower risk associated with the treatment. When comparing microdermabrasion to the other more invasive skin resurfacing procedures and techniques, the process is superior at improving issues on the surface of the skin; such as sun damage, (photoaging) age spots, fine lines, superficial scarring and acne. Many other skin-correcting procedures like laser resurfacing, dermabrasion and chemical peels — either do not provide the desired result or, they are more invasive and include longer recovery time. While the face is the most commonly treated area, all skin areas can be treated; the chest, neck, back, hands, and most all other sections of the body.

Microdermabrasion is Pain-Free

Microdermabrasion treatment causes no-pain. It is a noninvasive skin-rejuvenation procedure. The method entails using a fine-abrasive tip, and a vacuum; suction is then applied to the affected area of skin. Usually, needles nor anesthetics are necessary for microdermabrasion. The speed and the pressure from the vacuum are adjustable and will usually be dependent upon the sensitivity of the patient’s skin. The sensation of the procedure is frequently compared to a cat’s tongue licking the side of your face.

Is there any Recovery or Downtime After a Microdermabrasion Treatment?

When performed at a spa or medical facility, the microdermabrasion sessions will typically last around an hour. There is usually minimal-to-no recovery time, and patients often return to normal activity immediately following the procedure. Gentle creams and makeup are generally permissible once the session is complete. Research shows that the microdermabrasion will actually enable the absorption of topical medications, as it intensifies the penetrability of the skin.

The process of microdermabrasion works by removing the stratum corneum; the top of our three layers of the skin. Similar to brushing your teeth, the procedure will gently remove plaque and other various skin debris. Our skin will naturally regenerate at around a 30-day interval; meaning that any improvement seen using microdermabrasion is short-term and will require additional sessions of treatment. It is recommended that the sessions be repeated every two to four weeks for a continuation of improvement. For best results you should avoid the sun and use sunscreen; make certain to use gentle skin-care products.

• Clean Skin & Pores:With ongoing treatments, your pores will remain unnoticeable, and your face will be fresh and clean. Microdermabrasion cleans out your pores and leaves your skin healthy and smooth.

• New Cells & New Skin:Microdermabrasion treatments permit new skin cell growth; regular treatments ensure that your old skin cells are removed and permit healthy ones to appear.

• Enjoy Smoother Skin:Regular treatments will bring smoother texture to your skin, and will reduce (sometimes eliminate) the appearance of blemishes and fine lines. Ongoing treatments ensure that your skin’s texture is soft and supple all of the time.

• Erase Acne Scars:Acne can cause superficial scarring on your face; a regular microdermabrasion facial treatment can significantly help to reduce the appearance of the scars. In some cases the scars are eliminated altogether.

Additional Benefits of Ongoing a Microdermabrasion include:

• Softens and reduces the look of fine lines and wrinkles

• Smooths-over coarse-textured skin

• Reduces the appearance of acne and associated scars

• Eliminates blackheads and whiteheads

• Revives dull, stressed or clogged skin

• Reduces the appearance of sun-damage

• Decreases the look of age spots

• Improves skin pigmentation

• Increases absorption of product and medication to the skin

In the US, Microdermabrasion that is performed by a medical professional will cost you anywhere from $150 to $250 per treatment. Medical professionals recommend that patients receive up to ten treatments in order to receive ongoing benefits. The total cost for ten treatments will cost approximately $2500 at high-end spas and dermatologist. Remember, for ongoing treatment you will potentially pay around $30,000 each year for professional microdermabrasion treatments. The cost is high. In order to enjoy the many benefits of microdermabrasion, it is important to find a more economical way to achieve healthier skin.

Microdermabrasion Cost by State:

Note: All prices are averages based on regular price (excludes discounts) of microdermabrasion for all 50 states.

Move your mouse over the map to see how much microdermabrasion cost in every US state.

An excellent alternative to spending absurd amounts of money is by purchasing an at home microdermabrasion machine. As opposed to a never-ending payment for a professional service, a microdermabrasion machine will supply great results and at a fraction of the cost. In today’s economy money is tight, but we do not have to do without in order to acquire a healthier and younger appearance.

What To Look For When Buying a Microdermabrasion Machine?

With so many various microdermabrasion machines offered in today market, how do you choose the best microdermabrasion machine? Unfortunately, you cannot always believe reviews, as most are at best a weak attempt to encourage you to buy a particular brand. The microdermabrasion machines all appear to look equal, but regrettably they are not.

Consider the following tips in order to obtain one of the best microdermabrasion machines available. Below are is a guideline of what to search for:

• Easy to use:Make sure that the machine you decide to purchase is not too difficult to use. You do not want to spend a week trying to figure out the instructions. The best microdermabrasion machine will be of high-quality and yet simple to use. A good machine will provide an excellent service, but will not require you to become a rocket-scientist.

• Easy to hold and maneuver:The best microdermabrasion machine will not require that you bench-press 250lbs in order to use it; nor should it be any less comfortable to use than an electric toothbrush. High-quality machines do not have to weigh a ton in order to be the best. The one you choose should be fairly portable and easily maneuvered.

• Provides instant results:A high-quality machine will deliver substantial results and instantly. When used correctly, the best microdermabrasion machine will provide an outcome similar to ones used at professional spas and clinics.

• Provides warranty or guarantee:Whether it’s a manufacture warranty covering defects, or a satisfaction guarantee; a good microdermabrasion machine will offer the consumer a safeguard of some form.

In the current market, there are two standard microdermabrasion treatments offered. The one that you select will hinge on your views and opinions.

Crystal Microdermabrasion

The crystal microdermabrasion is the more traditional choice among the two available methods to purchase. Many clinics and spas use the crystal microdermabrasion method in a lot of their skin-care treatments. The crystals are 100 percent natural, and are used only once and then discarded. This guarantees you that the materials being used for treatment are entirely clean and devoid of any contamination or bacteria. There are various crystal forms that may be used, and is dependent upon which machine or medical professional you decide on.

Aluminum Oxide crystals

The Aluminum Oxide crystals are tiny particles that are precious stones. A very substantial metal composite, the aluminum oxide crystals will not break and are irregularly formed. Their rough edges enable them to remove skin cells that are dead effectively.

Sodium Bicarbonate crystals

Another crystal used is the Sodium Bicarbonate crystal. The Sodium Bicarbonate is becoming more common because of the milder effects this crystal has on your skin.

Both the Aluminum Oxide and the Sodium Bicarbonate crystals offer high-quality advantages. However, the aluminum oxide particles tend to be a bit rougher on the skin. Medical professional suggest that the aluminum oxide crystals should be used only by trained specialists, as the sodium bicarbonate crystals are gentle enough for use at home.

A paddle-shaped tool is used to apply the crystals onto the surface of the skin — working the crystals and then vacuuming back into the device. This process reduces the risk of releasing any aluminum oxide into the air around you. For added safety measures, you are supplied with a pair of goggles; this is to ensure that your eyes are safe while you are using a microdermabrasion machine.

Diamond Microdermabrasion

The diamond microdermabrasion will gently remove all dead skin cells using a rubbing action. It also used a detachable diamond base surface, which is located on the applicator’s end. The surface is rough and causes the dead skin to remove extremely easy. And, it allows you to alternate between several tips to cater to your individual skin type. There is no risk associated with the use of crystals such as ingestion, and the diamond microdermabrasion can be carefully applied near the area of your nose and eyes. Similar to crystal microdermabrasion, the dead skin cells and debris is eliminated, leaving your skin clean and fresh.

It is however extremely important to use the diamond microdermabrasion gently and correctly, as diamonds are hard and could cause injury if pressure is applied too heavy. Also, it is important to always clean your tools after each use and after each skin area, to avoid the spreading of bacteria.

Who Should Consider Microdermabrasion?

Microdermabrasion can be valuable for individuals with dull skin, acne marks, minor acne, pick marks, and shallow scars. It is also a good treatment option for people with busy routines, which are looking for skin treatment benefits with no downtime or side effects. Individuals with more profound acne scarring may require an additional amount of time; more time is needed to remove more severe scarring.

Types of Microdermabrasion Machines

Crystal Microdermabrasion Machines

The original microdermabrasion machines used a circular motion, which was combined with a cream that was infused with either crystals or aluminum oxide. The crystals used were to exfoliate the skin and clean away the top-layer of the skin; all while removing various debris from the face.

A resurfacing wand is used to massage the skin and clean-out the pores. This resurfacing wand offers a user-friendly adjustment level, which can be changed according to the individual’s preference or skin condition. Crystal machines are typically accompanied by a handheld device that drives a high-speed movement of Aluminum Oxide crystals onto the skin. At the same time, a vacuum pulls away any dead skin cells along with the crystals and the grime.

After diamonds, Aluminum Oxide crystals are the hardest mineral on earth. Since the crystals are irregularly shaped, they abrade more effectively. Additionally, they will not cause an allergic reaction, and they are non-carcinogenic.

Pros

• The Crystal Microdermabrasion technique supplies access the surface of the face.

• Crystal Microdermabrasion is much gentler and will usually not cause any soreness.

• This machine is available to the general public.

Cons

• Slight risk of the crystals escaping and releasing into the air.

• Unable to treat around the mouth or eyes because of the crystals.

Diamond-Tip Microdermabrasion Machines

Professional spas and medical facilities are beginning to use the diamond-tip microdermabrasion machines over the crystals machines. Diamonds are naturally harder than crystals, and the eyes and mouth area can be treated and resurfaced. Since there is no risk involved in using the diamond method, this microdermabrasion machine is becoming more preferred and most popular on the market. The diamond machines offers the same benefits of the crystal microdermabrasion machines without any possible risk at all.

Diamond tip machines supply several wand tools that differ in size or roughness. This machine is suitable for use on virtually any skin type, as well as it provides an ideal resurfacing depth. The wand’s tip comprises diamond chips that are natural, and they can resurface and remove the dead cells on your face. These cells are then vacuumed away, and the waste is filtered and removed. The diamond microdermabrasion machine is much easier to control and causes fewer complaints of skin irritation.

Pros

• The Diamond tip machine is suitable for use around the mouth and close to the eye area.

• No potentially harmful particles are released into the air or entered into the body while in use.

• The availability of the diamond microdermabrasion machine is increasing; it is becoming more and more popular in spas and in clinics.

Cons

• It can be slightly harsher on the skin if not used properly.

• The Diamond tip microdermabrasion machine has a flat surface, making it more difficult to reach crevices on the face.

Equally, the Crystal Microdermabrasion Machine and the Diamond Tip Microdermabrasion machine remove the top-layer of the skin; making way for the growth of new and healthier skin underneath. They both cause little to no pain, and typically do not cause skin irritations. They both improve on the circulation of blood within your skin cells, and will eliminate surface damages. These microdermabrasion machines are ideal for the removal of debris and bacteria from within the skin’s pores — generating a restored skin appearance and more attractive skin. Research suggest that microdermabrasion treatments will also intensify the production of collagen.

The controversy surrounding the use of aluminum oxide is considerable. However most medical professional agree, that when performed carefully and correctly, the use of the crystals microdermabrasion machine for the resurfacing of the skin is benign. The first-generation microdermabrasion machines that used the crystal method are gradually phasing away; specialist are exchanging them for the diamond tip microdermabrasion machines.

The diamond machines cause no risk of from possible ingestion. However when used improperly, it can cause damage to the skin’s surface and may cause infection. The bacteria from the exfoliation process can remain on the wand’s tip and cause it to spread to other areas of the body. It is important to properly clean the tips to ensure maximum safety and cleanliness of the tools.

How To Choose a Microdermabrasion Machine That Fits Your Particular Needs

You will need to find a microdermabrasion machine that includes all necessary tools for your microdermabrasion session. A complete kit should provide everything required to perform the microdermabrasion; from the beginning to the end. The best microdermabrasion machine will include the owner’s manual, and will provide detailed instructions on its use.

OTC Creams & Lotions VS Microdermabrasion

Microdermabrasion Machine Facts

Microdermabrasion will enable acne prone skin to absorb topical medications and skin care products that are necessary to treat breakouts. The best at home microdermabrasion machines will also reduce any marks and blemishes associated.

Additional benefits of using the microdermabrasion method for acne prone skin are:

• Decrease the formation of comedones and recovers mild acne

• Shrinks the pores on your skin

• Reduces excessive oils

• Smooths-out shallow acne scars

• Reduces lines and wrinkles

• Smooths the skin and improves your complexion

• Evens-out you skin tone and fights damages caused by the sun

• Intensely exfoliates

• Recovers the tone and texture of your skin